MOTOSPRAY BUMPER PRIMER
HIGH BUILD SANDABLE PRIMER
MOTOSPRAY Bumper Primer is a high-build, sandable undercoat that delivers excellent top coat adhsion for the repair of plastic bumpers and parts.
Size 400G
Colour GREY
Available from
Description
MOTOSPRAY Bumper Primer is a high build, sandable, semi flexible, primer/filler suitable for use in the repair of most bumpers and plastic parts. Suitable for use under all Motospray finishes on plastic bumper bars, louvres, grilles and trim components.
Additional information
| Size | 400G |
|---|---|
| Colour | GREY |
PREPARATION: New Parts: Scuff with coarse abrasive pad only. Clean thoroughly with MOTOSPRAY Prepwash. Apply MOTOSPRAY Flexi Prime. Apply MOTOSPRAY Bumper Primer to fill imperfections and scratches. Old Parts: Complete repairs as required. All surfaces to be primed should be thoroughly cleaned with MOTOSPRAY Prepwash to remove grease, wax, dirt, oil and silicon. Dry sand all areas to be primed with P400 grit paper. Clean with MOTOSPRAY Prepwash. Apply Bumper Primer.
APPLICATION: Shake can vigorously for one minute after the sound of the agitator is heard. Spray in an even, overlapping pattern from a distance of approximately 25 cm. Spot prime repaired areas with 2-3 coats of Bumper Primer. Allow a 10 minute flash off between coats. Allow to dry for 15 minutes at 20°. Allow longer at lower temperatures. Finally, apply 2-3 light coats to all surfaces requiring a top coat. Allow a 10 minute flash off between coats. Turn the can upside down and spray briefly to clear the nozzle after use.
CLEAN UP: Use MOTOSPRAY Superglow General Purpose Thinner.
DRYING TIME: 15 minutes to touch dry. Can be handled after approximately 2 hours.
