MOTOSPRAY RUST CONVERTER
PRIMER & SEALER
MOTOSPRAY Rust Converter Primer & Sealer converts rust to a black, paintable primer
Size 400G
Available from
Description
MOTOSPRAY Rust Converter Primer & Sealer converts rust to a stable, black primed finish preventing further corrosion. It can be primed, filled and painted over to give additional corrosion proofing or sound deadening. It is suitable to treat rust in all areas
where MOTOSPRAY Deoxidiser & Rust Remover is recommended and is ideal for use in inaccessible areas and for tools and components that are usually not primed or rust proofed.
Additional information
| Size | 400G |
|---|
SURFACE PREPARATION: Remove loose rust, flaking paint and mill scale by using wire brush etc. Use MOTOSPRAY Prepwash to wash the surface to remove all traces of wax, grease, silicone, oil, salt, mould, mildew, dust and dirt. Allow to dry before applying Rust Converter. Mask off surrounding areas to avoid over painting.
APPLICATION: Shake can vigorously for 1 minute after the sound of the agitator is heard. Spray in an even, overlapping pattern from a distance of approximately 25cm. Apply to dry surfaces only. Do not apply to hot surfaces. Avoid if possible application in direct sunshine. The rusted areas of the surface will turn predominantly black. Only apply to rusted surfaces. MOTOSPRAY Rust Converter Primer & Sealer is not a rust preventative for clean steel.
FINISHING: Suitable for use under most paint systems. May be left up to 3 months before priming and top coating. With single pack paints allow minimum drying 3 hours at 20°C before applying primers or topcoats. For 2 pack paints, allow 24 hours drying at 20°C.
CLEAN UP: Use MOTOSPRAY Superglow General Purpose Thinner.
