MOTOSPRAY SOUND DEADENER
SPRAY ON
MOTOSPRAY Sound Deadener is a fast-drying, flexible coating for sound deadening & underbody protection
Size 400G
Available from
Description
MOTOSPRAY Sound Deadener is a fast-drying, flexible, bitumen-based coating for sound deadening and protection against corrosion, dust, moisture and abrasion. May be used on underbody parts such as mudguards, subframes, bonnets, inside door panels, boots and spare wheel tubs. No primer or topcoat required.
Additional information
| Size | 400G |
|---|
SURFACE PREPARATION: Remove all surface dirt and wipe over MOTOSPRAY Prepwash to ensure that surface is clean, dry and free from dust. Mask off surrounding areas to avoid overspray.
APPLICATION: Shake can vigorously for 2-3 minutes. Spray in an even, overlapping pattern from a distance of approximately 25cm, continuing to shake the can during application. Apply two to three even coats to gradually increase film thickness and avoiding heavy, wet coats to minimise risk of runs. DO NOT coat functional parts such as springs, exhausts, drive drafts, etc.
DRYING TIME: Touch dry in approx. 20 minutes. Hard dry approx. 6 hours. Turn can upside down and spray briefly to clear nozzle after use.
CLEAN UP: Use MOTOSPRAY Superglow General Purpose Thinner.
